EX1403A 16-Channel Strain/Bridge, Ohms/RTD, Volts Digitizer

Brand: VTI Instruments
EX1403A Strain Instrument with Voltage and Resistance Measurement Capabilities
The EX1403A is a 16 channel Strain Instrument which includes Voltage and Resistance measurement capabilities. The EX1403A is based on a flexible data acquisition platform that offers superior signal integrity. A compact 1U half design, controllable via LAN / LXI and embedded Webinterface, and RJ-45 input connectors, enables easy setup and plug&play operation.
Prijs op aanvraag

Vanwege wereldwijde levertijden en fluctuerende voorraden kunt u de levertijd hier controleren.

Productspecificaties

Meer informatie
Fabrikant VTI Instruments
Art.nr. VTI-70-0655-000R

Documentatie

Please use the icons below to download any files related to this item. We aim to have the datasheet and/or catalog available.

Productomschrijving

The EX1403A Precision Bridge and Strain Gauge Instrument sets a new standard for strain and bridge measurements, delivering the highest performance measurements possible while controlling overall test hardware costs.

With unmatched performance, accuracy and reliability, the EX1403A is the “go-to” solution for the most complex structural test applications worldwide. A single system that can provide high-quality static or high-speed strain measurements:

  • Airframe structural and fatigue test 
  • Rocket and satellite structural test 
  • Wind tunnel flight load test 
  • General purpose bridge measurements 
  • Load frame materials testing

The EX1403A integrates Extended Functions as defined in the LXI specifications to provide box-to-box synchronization to correlate acquired data precisely. Time-stamping of data and LAN Event Messaging that simplify intermodule communication and flexible triggering options over Ethernet.

The EX1403A supports easy integration and synchronization of multiple devices through the IEEE-1588 v2 Precision Time Protocol standard for synchronization, providing an architecture that can be scaled from tens to thousands of channels. Multiple instruments can be easily distributed extremely close to the measurement points of interest, reducing the run length of analog cabling and minimizing errors induced by noisy environments.

Additionally, Power Over Ethernet (PoE) enables a single cable to be used for both power and data capture. All measurement data is returned with IEEE-1588 timestamp codes with typical accuracies of <200nS, ensuring that acquired data is tightly correlated across the test article.

Features:

  • 16-channel Strain/Bridge, Ohms/RTD & Voltage Measurements
  • 24-bit, delta-sigma ADC, simultaneous sampling
  • Programmable Sample Rate up to 128kSPS
  • Full, Half & Quarter Bridge with 120Ω, 350Ω & 1kΩ bridge completion
  • Voltage Excitation: 0.5V to 10V
  • Current Excitation: 0.46mA
  • 2-Wire & 4-Wire Ohms/RTD
  • Bridge Zero Balancing
  • Built-In-Self-Test (BIST)
  • Strain Lead Wire Calibration
  • Shunt Calibration: 50kΩ, 100kΩ & External provided by User
  • TEDS Support
  • LXI Ethernet Interface
  • IEEE-1588 Synchronization
  • Power over Ethernet (PoE) or 10–50 V DC input
  • Built-in Parallel Data Streaming
  • Full-featured Embedded Web Interface
  • Compact 1U Half-rack Form Factor