Pulse Rider PG-1074

The Pulse Rider Series offers premium signal integrity with the easiest to use touch screen display interface (SimpleRider™).

The Generation of pulses requires only a few screen touches.

The output Voltage can be adjusted up to 5 Volts pk-pk in a window of ±5 Volts with 70 ps edge rate (based on RiderEdge™ technology) and transitions with minimal overshoot and ringing.

Its innovative hardware architecture provides the possibility to generate advanced pulse sequences, such as double pulse or quad pulse, with fully independent timing parameters.

• 70 ps Edge Time
• 5 V pk-pk Output Voltage Range
• Min Pulse Width less than 300 ps
• Dual and Quad Channels Systems
• SimpleRider™ touch User Interface

• Up to 4 channels
• < 70 ps rise/fall time (20%-80%)
• Adjustable output level from 10 mVpp to 5 Vpp
• Adjustable baseline offset ± 2.5 V
• Maximum repetition rate 800 MHz per channel
• Pulse width from 300 ps to > 1 s
• Width resolution 10 ps
• continuous, single, burst, gated, external trigger mode
• Trigger in to output jitter < 35ps RMS
• External clock-in and clock-out for easy synchronization