MDO4AFG

Tektronix
MDO4000C Arbitrary Function Generator upgrade
1 110,00 €

Product specifications

Plus d'infos
Manufacturer Tektronix
Réf. TEK-MDO4AFG
Signal Generator Type Function Generators
Signal Generator Nr. Channels 1
Signal Generator Frequency 50,00 MHz

Product description

Add arbitrary function generator to any MDO4000C Series product.

One-time, permanent upgrade to any MDO4000C model. Enabled through single-use application module hardware key. The hardware key is used to enable the feature and then is not required for future use.

Sine

  • Frequency range 0.1 Hz to 50 MHz
  • Amplitude range 20 mVp-p to 5 Vp-p into Hi-Z; 10 mVp-p to 2.5 Vp-p into 50 Ω
  • Amplitude flatness (typical) ±0.5dB at 1 kHz (±1.5 dB for<20 mVp-p amplitudes)
  • Total harmonic distortion (typical)
    • 1% into 50 Ω
    • 2% for amplitude < 50 mV and frequencies > 10 MHz
    • 3% for amplitude < 20 mV and frequencies > 10 MHz
  • Spurious free dynamic range (SFDR) (typical)
    • -40 dBc (Vp-p≥ 0.1V); -30dBc (Vp-p≤ 0.1V), 50 Ω load

Square/Pulse

  • Frequency range 0.1 Hz to 25 MHz
  • Amplitude range 20 mVp-p to 5 Vp-p into Hi-Z; 10 mVp-p to 2.5 Vp-p into 50 Ω
  • Duty cycle 10% to 90% or 10 ns minimum pulse, whichever is larger cycle
  • Duty cycle resolution 0.1%
  • Pulse width minimum (typical) 10 ns
  • Rise/fall time (typical) 5 ns (10% –90%)
  • Pulse width resolution 100 ps
  • Overshoot (typical) < 2% for signal steps greater than 100 mV
  • Asymmetry ±1% ±5 ns, at 50% duty cycle
  • Jitter (TIE RMS) (typical) < 500 ps

Ramp/Triangle

  • Frequency range 0.1 Hz to 500 kHz
  • Amplitude range 20 mVp-p to 5 Vp-p into Hi-Z; 10 mVp-p to 2.5 Vp-p into 50 Ω
  • Variable symmetry 0% to 100%
  • Symmetry resolution 0.1%

DC

  • Level range (typical) ±2.5 V into Hi-Z; ±1.25 V into 50 Ω

Noise

  • Amplitude range 20 mVp-p to 5 Vp-p into Hi-Z;10 mVp-p to 2.5 Vp-p into 50 Ω
  • Amplitude resolution 0% to 100% in 1% increments

Sin(×)/× (Sinc)

  • Frequency range (typical) 0.1 Hz to 2 MHz
  • Amplitude range 20 mVp-p to 3.0 Vp-p into Hi-Z; 10 mVp-p to 1.5 Vp-p into 50 Ω

Gaussian

  • Frequency range (typical) 0.1 Hz to 5 MHz
  • Amplitude range 20 mVp-p to 2.5 Vp-p into Hi-Z; 10 mVp-p to 1.25 Vp-p into 50 Ω

Lorentz

  • Frequency range (typical) 0.1 Hz to 5 MHz
  • Amplitude range 20 mVp-p to 2.4 Vp-p into Hi-Z; 10 mVp-p to 1.2 Vp-p into 50 Ω

Exponential Rise/Decay

  • Frequency range (typical) 0.1 Hz to 5 MHz
  • Amplitude range 20 mVp-p to 2.5 Vp-p into Hi-Z; 10 mVp-p to 1.25 Vp-p into 50 Ω

Haversine

  • Frequency range (typical) 0.1 Hz to 5 MHz
  • Amplitude range 20 mVp-p to 2.5 Vp-p into Hi-Z; 10 mVp-p to 1.25 Vp-p into 50 Ω

Cardiac (typical)

  • Frequency range 0.1 Hz to 500 kHz
  • Amplitude range 20 mVp-p to 5 Vp-p into Hi-Z; 10 mVp-p to 2.5 Vp-p into 50 Ω

Arbitrary

  • Memory depth 1 to 128 k
  • Amplitude range 20 mVp-p to 5 Vp-p into Hi-Z; 10 mVp-p to 2.5 Vp-p into 50 Ω
  • Repetition rate 0.1 Hz to 25 MHz
  • Sample rate 250 MS/s

Frequency accuracy

  • Sine 
    • wave and ramp 130 ppm (frequency < 10 kHz)
    • 50 ppm (frequency ≥ 10 kHz)
  • Square wave and pulse 
    • 130 ppm (frequency < 10 kHz)
    • 50 ppm (frequency ≥ 10 kHz)
  • Resolution 
    • 0.1 Hz or 4 digits, whichever is larger

Amplitude accuracy ±[ (1.5% of peak-to-peak amplitude setting) + (1.5% of DC offset setting) + 1 mV ] (frequency = 1 kHz)
DC offset

  • DC offset range ±2.5 V into Hi-Z; ±1.25 V into 50 Ω
  • DC offset resolution 1 mV into Hi-Z; 500 uV into 50 Ω
  • Offset accuracy ±[(1.5% of absolute offset voltage setting) + 1 mV]; derated 3 mV for every 10 °C away from 25 °C

ArbExpress®

The MDO4000C is compatible with ArbExpress® PC-based signal generator waveform creation and editing software.
Capture waveforms on the MDO4000C oscilloscope and transfer them to ArbExpress for editing.
Create complex waveforms in ArbExpress and transfer them to the arbitrary function generator in the MDO4000C for output.

To download ArbExpress software, go to www.tektronix.com/downloads.