MDO3032
Brand: Tektronix
Mixed Domain Oscilloscope 350MHz, 2ch analog + 1ch RF 9kHz-350MHz (3GHz optional)
350MHz, 2ch analog + 1ch RF 9kHz-350MHz (3GHz optional), 2.5GSa/s, 10Msa memory - optionally expandable with 16ch digital and/or 1ch 50MHz Function/250MSa/s Arbitrary Waveform Generator - free Digital Voltage Meter after registration.
11 300,00 €
Product specifications
| Manufacturer | Tektronix |
|---|---|
| Réf. | TEK-MDO3032 |
| Inputs | 2 Analog, 2 Analog + 16 Digital, 2 Analog + 16 Digital + RF |
| Bus Decoding | CAN/LIN, Flexray, I2C/SPI, I2S/LJ/RJ/TDM, Mask Testing, MIL-STD-1553, RS232/422/485/UART, USB |
| Freq Range | 350,00 MHz |
| Memory Depth | 10,00 MB |
| Signal Generator Type | Function Generators, Waveform Generators |
| Signal Generator Nr. Channels | 1 |
| Signal Generator Frequency | 50,00 MHz |
Product description
Today's integrated designs need an oscilloscope that is just as integrated - such as the MDO3000 Mixed Domain Oscilloscope (MDO) Series. It is the ultimate 6-in-1 integrated oscilloscope that includes an integrated spectrum analyzer, arbitrary function generator, logic analyzer, protocol analyzer, and digital voltmeter/counter. The MDO3000 is completely customizable and fully upgradeable. Add the instruments and performance you need now - or later.
KEY PERFORMANCE SPECIFICATIONS
- Oscilloscope
- 2 and 4 analog channel models
- 1 GHz, 500 MHz, 350 MHz, 200 MHz, 100 MHz bandwidth models
- Bandwidth is upgradable (up to 1 GHz)
- Up to 5 GS/s sample rate
- 10 M record length on all channels
- >280,000 wfm/s maximum waveform capture rate
- Standard passive voltage probes with 3.9 pF capacitive loading and 1 GHz, 500 MHz, or 250 MHz analog bandwidth
- Spectrum Analyzer
- Frequency range
- Standard: 9 kHz - oscilloscope bandwidth
- Optional: 9 kHz - 3 GHz
- Ultra-wide capture bandwidth up to 3 GHz
- Frequency range
- Arbitrary Function Generator (Optional)
- 13 predefined waveform types
- 50 MHz waveform generation
- 128 k arbitrary generator record length
- 250 MS/s arbitrary generator sample rate
- Logic Analyzer (Optional)
- 16 digital channels
- 10 M record length on all channels
- 121.2 ps timing resolution
- Protocol Analyzer (Optional)
- Serial bus support for I2C, SPI, RS-232/422/485/UART, USB 2.0, CAN, LIN, FlexRay, MIL-STD-1553, and Audio standards
- Digital Voltmeter (Free with product registration)
- 4-digit AC RMS, DC, and AC+DC RMS voltage measurements
- 5-digit frequency measurements
KEY FEATURES
- FastAcq™ high-speed waveform capture rate finds elusive signal anomalies quickly
- Wave Inspector® Controls provide easy navigation and automated search of waveform data
- 33 automated measurements and waveform histograms for simplified waveform analysis
- TekVPI® probe interface directly supports active, differential, and current probes for automatic scaling and units
- 9 in. (229 mm) WVGA widescreen color display
- Small footprint and lightweight – Only 5.8 in. (147 mm) deep and 9.2 lb. (4.2 kg)
- Spectral Analysis
- Dedicated front-panel controls for commonly performed tasks
- Automated peak markers identify frequency and amplitude of spectrum peaks
- Manual markers enable non-peak measurements
- Trace types include: Normal, Average, Max Hold, and Min Hold
- Spectrogram display enables easy observation and insight into slowly changing RF phenomena
- Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
- Arbitrary Function Generation
- Generate predefined signals to quickly simulate missing devices in designs
- Capture signals on analog or digital inputs, transfer to the arbitrary edit memory, and replicate out from the AFG
- Add noise to any signal to easily perform margin testing
- Mixed signal design and analysis
- Automated triggering, decode, and search on parallel buses
- Multichannel setup and hold triggering
- MagniVu™ high-speed acquisition provides 121.2 ps fine timing resolution on digital channels
- Protocol Analysis
- Trigger, decode and automatically search on packet-level content on most common embedded design serial bus standards.
- Export protocol decode tables for use in documenting results
- Digital Voltmeter and Frequency Counter
- Quickly validate voltage or frequency measurements at a glance
- Graphical readout provides information on stability of the measurement
- Fully upgradeable
- Add functionality, increase bandwidth or spectrum analyzer frequency range over time as your needs change or budget allows
OPTIONAL APPLICATION SUPPORT
- Power analysis
- Limit and mask testing
Options and Accessories
Cochez les articles à ajouter au panier ou
