Arb Rider AWG-4022

The ARB Rider Series offers premium signal integrity with the easiest to use touch screen display interface (SimpleRiderTM).

The Generation of complex signals requires only a few screen touches.

The output Voltage can be adjusted in Amplified mode up to 5 Volts pk-pk into a 50 Ω load with the possibility, thanks to the analog Bandwidth of 1 Ghz, of performing edges down to 350 ps with minimal overshoot and ringing. The Disruptive and innovative architecture provides the possibility to generate unmatched performance, versatile functionality, outstanding usability, and upgradability during the life of the instrument.

ARB Rider 4000 is also an affordable waveform generation platform which helps to stretch the specifications of your project to the limit, offering not just analog output but also digital channels.

• 2.5 GS/s, 14 Bit Vertical Resolution
• Minimum Edge time down to 350 ps
• Maximum dynamic range up to 5Vpp into 50 ohms
• Up to 64 Mpts per Channel
• 16-32 Digital Channels in synchronous with analog Generation
• Multi Instrument Synchronization: up to 8 Analog Channels
• SW User Interfaces: Expert Rider for AWG mode and Simple Rider for AFG mode

Function Generator, Arb Generator and Digital Pattern Generator all in one.

• 2,5 Gs,s 14 Bit Resolution
• 5Vpp into 50 ohm
• Up to 64 Ms/s per Channel
• Rise and fall time less than 350 ps (direct DAC)
• 16-32 Digital Channels in synchronous with analog Generation
• SimpleRider™ Wizard users Interface 

Key performance specifications

• Basic mode (AFG)
• Two analog channels
• 600 MHz sine waveforms
• 2.5 GS/s, 14-bit, 16 kpts arbitrary waveforms
• Amplitude up to 5 Vp-p into 50 Ω load
• +/- 2.5V programmable offset

Advanced mode (AWG)

• Two analog channels
• 16/32-bit digital channels (optional)
• 1/16/32/64 Mpts per channel arbitrary waveform memory (optional)
• Up to 1 GHz bandwidth
• SFDR < -60 dBc