Pendulum
SKU | PEN-A800DI |
---|---|
Manufacturer | Pendulum |
Please use the icons below to download any files related to this item. We aim to have the datasheet and/or catalog available.
GENERAL DESCRIPTION
The A800DI is a general purpose linear amplifier designed for laboratory use. It is based on a fast high-voltage operational amplifier with a feedback network chosen to give a voltage amplification of 100 times. Any function or arbitrary waveform generator with low output impedance and output voltage up to ±10 V can be used as an input device. The instrument contains two identical amplifiers sharing a common power supply. The instrument also includes a low voltage phase inverter that facilitates driving the two high voltage outputs in counter-phase. The amplifier outputs high voltage signals at high frequency. It is, thus, imperative for the safe operation that the user understands the possibilities and limitations of the instrument. Isolated BNC output connector is used to comply with safety requirements.
INPUT AMPLITUDE
The amplitude of the input signal should normally be kept within ±4 V. The input protection network limits the signal amplitude delivered to the power amplifier to a safe value. It also effectively cuts accidental spikes and overshoots. However, large and prolonged overvoltage at the input may blow the microfuse in the input protection circuit.
• Ultra-linear Amplifiers from 100Vp-p up to 1600Vp-p
• Two amplifiers in one box
• High Bandwidth, up to 1 MHz
• High Slew rate, up to 500V/μs
• Low output impedance, down to 0.1 Ohm
• Wide range of models to suit any performance and/or budget demand