Baseband Video and Audio testing
Baseband video and audio testing
Audio Loudness Measurement
This how to guide highlights the benefits of the Loudness Measurements software on the WFM and WVR series products of Tektronix.
Troubleshooting and Analyzing Digital Video Signals with CaptureVu
Digital video systems provide and maintain the quality of the image throughout the transmission path. However when digital video problems occur they often appear to happen randomly and can be the most difficult to isolate and diagnose. This application note details how to troubleshoot and analyze these video signals through Tektronix' CaptureVu technology.
Physical Layer Testing of 3G-SDI and HD-SDI Serial Digital Signals
The transition to high definition (HD) and 3G-SDI can be a smooth one if careful engineering practices are followed in the initial stages of planning the facility. Our application note provides a concise overview of what you need to be aware of during the transition.
A Guide to Standard and High-Definition Digital Video Measurements
This guide discusses the basics of the digital signal and illustrates the measurements available to ensure your signals are valid and legal.
Understanding Jitter Measurement for Serial Digital Video Signals
In this technical guide, we describe the different techniques for measuring jitter in serial digital video signals and how they can lead to different measurement results. We further identify areas where the standards should supply additional specifications and guidance to help ensure more consistent jitter measurements.
16-Channel Audio Monitoring How to Guide
Monitoring of the audio levels is a critical part of ensuring the fidelity of the signal. Within the Serial Digital Interface (SDI) for High Definition (HD) and Standard Definition (SD) up to 16 channels of audio can be embedded within the signal. This How To Guide provides an overview of how to configure the waveform monitor to view all 16 Channels of embedded audio and quickly switch to 1-8 and 9-16 audio channels.