Description
Active oscilloscope probes
This range includes high-voltage probes that extend the input range of your scope, and high-frequency probes that boost its input impedance for more accurate measurements.
All active probes require a power supply or batteries. Our battery-powered probes are supplied complete with batteries, while optional AC adaptors are available for the externally powered types. Read our application note: Choosing the right Pico Technology active differential probe.
For making differential measurements whether measuring millivolts or upto 1000V CAT III consider also our PicoScope 4444 differential input oscilloscope
9 V AC power adaptor
The PS008 is an AC power adaptor for use with a selection of active differential probes. To see which AC adaptor your probe uses, select the relevant probe and check the optional accessories listed for that probe.
| PS008 AC adaptor specifications | |
|---|---|
| Input voltage range | 90 to 264 V AC 50/60 Hz |
| Input current | 300 mA RMS max. |
| Output voltage | 9 V DC |
| Current max. | 0.67 A |
| Power rating | 6 W |
| Ripple and noise | 150 mV p-p max. |
| Line regulation | ±3 % |
| Output cable and plug | 2.1 mm x 5.5 mm x 12 mm center-positive, 1.5 meter DC lead |
| Safety standards | Safety approved to: UL/CUL,GS & CE |