• With EXFO’s OpticalRF™ application, dangerous and difficult climbs can be eliminated
• By providing access to RF signals through the digital CPRI link available at the BBU site – which can be at the bottom of the tower or at the BBU hotel located kilometers away (C-RAN architecture).
• The digital link uses the CPRI protocol to carry RF signals in digital format (IQ data).

FTBx-735C Metro/PON FTTx/MDU OTDR OPTIMIZED FOR METRO/CORE AND FTTX/MDU FIBER DEPLOYMENTS AND TROUBLESHOOTING

Easy-to-use, multitechnology protocol analyzer software for Ethernet-based interfaces.

DATA POST-PROCESSING SOFTWARE for OTDR, ORL, CD, PMD: Intuitive graphical user interface (GUI) Live templating for OTDR testing Powerful batch processing Bidirectional batch analysis for iOLM (patent-pending) and OTDR Automatic tool for duplicated measurement verifi cation Live field reporting (FTB-1, FTB-2, FTB-2 Pro) OTDR and iOLM loopback reporting EXFO Connect (EC) integration

5-star fiber testing made simple for frontline techs

• Make it simpler. Boost your workforce output without increasing headcount
• Do it better. Upskill frontline techs plus a unique 5-star rating scale, to boost work quality
• Do it faster. Speed up service activation, MTTR and time to revenue with leaner MOPs for improved ROI and customer satisfaction
• Do more for less. Bring down OPEX and CAPEX by minimizing cost of ownership without compromising quality
• Get stronger networks. Take control of QoS and gain confidence in your fiber infrastructure ahead of its next evolution

CPRI application note

You’re under increasing pressure to develop and launch high-quality products and ramp up production lines. Choosing EXFO’s solutions for lab and manufacturing testing can help you innovate, develop, troubleshoot and deliver more, better and faster.

Distributed PMD Analyzer — FTB-5600

Optical Light Source SM & MM

Optical Light Source SM & MM

OPTICAL, ETHERNET AND MULTISERVICE TESTER

Optical POWER METER 10 calibrated wavelengths

Optical POWER METER 40 calibrated wavelengths + USB

Fiber Inspection Probe

Single-Ended Dispersion Analyzer (CD/PMD)

Simple, accurate Optical Power meter (5 calibrated wavelengths)

Is discontinued and replaced by model Maxtester 940

PMD AND CD ANALYZERS

Allows you to detect traffic and measure signals anywhere on singlemode fibers without having to disconnect them.

OTDR-Based remote fibertest system Scalable test solution for fiber network monitoring and management, from one stand-alone unit to centrally managed systems with one or hundreds of test ports Continuous 24/7 fiber network monitoring Dark-fiber SLA management

SONET/SDH, OTN and Ethernet interfaces up to 11.3 Gbit/s Packet synchronization turn-up and troubleshooting (SyncE/1588 PTP) Fibre Channel networks 1x, 2x, 4x, 8x and 10x interfaces. OTN testing (as per ITU-T G.709) bidirectional EtherSAM (ITU-T Y.1564) RFC 2544, multistream. TCP throughput test based on RFC 6349

FIP-400B Wireless. Fully automated WiFi enabled Fiber Inspection Probe with embedded analysis.

• Bright red laser at 635 nm
• Pulsed and CW
• operation 50 hours of operation (typical)
• Standard AAA alkaline batteries
• Rugged and weatherproof
• 2.5 mm universal connector
• GP-1008 2.5mm to 1,25mm adaptor

No more network outages as a result of fiber detection/identification procedures

The minimized need to access the network helps prevent errors

• Bright red laser at 655 nm
• Pulsed and CW
• operation 40 hours of operation (typical)
• Standard AAA alkaline batteries
• Pocket-size pen-style
• design 2.5 mm universal connector
• GP-1008 adaptor from 2,5mm to 1,25mm

OTDR for Access network construction Private networks Central office (CO) link certification

OPTIMIZED FOR SINGLEMODE ACCESS NETWORK TESTING 1310 nm/1550 nm and 1625 nm live port iOLM-ready for one-touch multiple acquisitions

FTBx-740C-DWC TUNABLE OTDR • C-BAND ITU grid channel selection to test through DWDM MUX/DEMUX • In-service testing of active networks • High-resolution and short dead zones • Select favorite or imported channels list • Supports combined DWDM and CWDM modules with FTB-2 Platform • Single-ended construction and troubleshooting solution • Fiber deep and node splitting • CBH Antenna feeds

CWDM and DWDM Optical Spectrum Analyzer. Highly accurate, easy-to-use OSA

The FTB-720 model combines singlemode and multimode functionalities

SONET/SDH, OTN and Ethernet interfaces up to 11.3 Gbit/s Packet synchronization turn-up and troubleshooting (SyncE/1588 PTP) Fibre Channel networks 1x, 2x, 4x, 8x and 10x interfaces. OTN testing (as per ITU-T G.709) bidirectional EtherSAM (ITU-T Y.1564) RFC 2544, multistream. TCP throughput test based on RFC 6349 OTDR: Dynamic range up to either 36 or 39 dB Combined singlemode/multimode wavelengths iOLM-ready: one-touch multiple acquisitions

OTDR for FTTx last-mile installation and troubleshooting Short access-network testing FTTA fi ber-DAS installations CATV/HFC network testing

OTDR for FTTx/MDU test challenges within PON networks Access network testing (P2P) Metro links testing (P2P) Live fiber troubleshooting

Key features 18 CWDM channels covered in a single OTDR port In-service testing of active networks High-resolution and short dead zones Select favorite or imported channels list

Performance validation of IEEE 1588v2, SyncE and TDM synchronization technologies Highly fl exible with support for multiple built-in measurement interfaces Adapted to lab and fi eld environments with optional internal measurement references—GPS and internal rubidium Addressing network synchronization for network turn-up, monitoring and troubleshooting applications through three

LAN/WAN Access OTDR OPTIMIZED FOR MULTIMODE AND SINGLEMODE ACCESS NETWORK TESTING