Portable Power Meter

Traditional live fiber detectors (LFDs) use thumb-activated fiber bending at a fixed angle to enable the detector to read the power leaking from the jacket. Since the angle is fixed and optimized for one wavelength and one fiber type, the bending often causes excessive loss, unreliable fiber detection (fiber activity is not detected), unreliable tone/traffic detection and permanent damage to the fiber. Key Features : - Loss <= 1 dB guaranteed for all fibers (except certain dark-coated fibers) and all wavelengths - No damage to the fiber: bending is always minimal, and the fiber is released when no power is detected - 100% reliability on traffic detection, direction identification and tone detection - Accurate in-line, non-disruptive power measurements - Safe to be used in long-haul applications and on high-payload fibers contrary to traditional LFDs    Specsheet EXFO LFD-250

The PPM-350 PON Power Meter is optimized for FTTx service activation and maintenance. This straightforward instrument simultaneously measures the optical power of voice, data and video signals. What’s more, it offers pass/fail indicators and requires virtually no fiber-optic experience nor training. Thanks to a patent-pending design, the PPM-350 acts as a pass-through device, which means that it is connected between the OLT and the ONT, allowing full communication while testing. Key Features : - FTTx service activation and maintenance - Simultaneous measurement (upstream and downstream) of all signal types—voice, data and video - 10 Threshold levels - Pass/warning/fail indicators - Easy to use, even for technicians not specialized in fiber optics - Go-anywhere versatility: enables quick, accurate testing all across the network    Specsheet EXFO PPM-350

With a high-power option and 10 calibrated wavelengths, the FPM-300 is the complete, yet simple power meter available. Combined with the FLS-300 or FOT-300 source units, which can transmit with a wavelength-identification digital encrypted protocol, the FPM-300 automatically uses the proper calibration parameters. This reduces the need for communication between the two technicians and decreases the potential for error. Key Features : - FTTx-compliant - Testing of passive optical networks (PONs) - 1310, 1490 and 1550 nm - Recommended by the ITU-T (G.983.3) - Fiber-to-the-home (FTTH) - Fiber-to-the-premises (FTTP) - 10 calibrated wavelengths - High-power option    Specsheet EXFO FPM-300

A triple test tool live fiber identifier, live fiber detector, dark fiber identifier for truly efficient fiber management. Combined with the TG-300 Tone Generator, the innovative LFD-300 FiberFinder Live Fiber Identifier enables technicians to pinpoint a specific live fiber without having to disconnect it and, above all, without having to guess. This brings key benefits: no more network outages as a result of fiber detection/identification procedures, and a minimized need to access the network, helping prevent errors. Key Features : - Pinpoints a specific live fiber - Induces minimal loss: <=1 dB - Locates a particular dark fiber using tone recognition (270 Hz, 1 kHz, 2 kHz) - Displays the power transmitted through the fiber    Specsheet EXFO TK-FF - LFD-300/TG-300

The highly versatile FPM-600 Power Meter is the ideal tool for link and system qualification. Thanks to its memory capacity of 1000 data items and converter software, it facilitates data management and enables data transfer to a PC via USB connection. The FPM-600 features a green/red LED indicator that gives you a pass or fail test verdict according to the thresholds you have defined. Key Features : - High accuracy, wide dynamic range and high power measurement capability (up to 26 dBm) - Memory capacity of 1000 data items; enables data transfer to a PC via USB connection - User-configurable pass/fail thresholds with LED indicator - Over 40 calibrated wavelengths, and Hold Min/Max Power function - Error-free, time-saving test features - Visual fault locator (VFL) option for quick and easy troubleshooting    Specsheet EXFO FPM-600

The FOT-930 MaxTester provides fully automated loss test results in 10 seconds for up to three wavelengths, as well as automatic ORL and fiber-length measurement. It combines a powerful light source, a power meter, a visual fault locator, a full-duplex digital talk set and a video fiber inspection probe, and it comes with a large, high-resolution color display. Key Features : - FTTx-compliant - 3-wavelength singlemode port - Testing of PONs (1310, 1490 and 1550 nm) - Fiber-to-the-home (FTTH) - Fiber-to-the-premises (FTTP) - Storage of over 1000 test reports - Automated report generation - Visual IL and ORL pass/fail analysis - No offset nulling required    Specsheet EXFO FOT-930 MaxTester

The LFD-200 Live Fiber Detector accurately detects traffic and measures signals anywhere on singlemode and multimode fibers without having to disconnect them. Check for signal presence before re-routing or maintenance, perform continuity tests and check cable labeling. Key Features : - Traffic, optical tone and continuous signal detection - Hold button for hands-free operation - Direct dBm measurements - Interchangeable adapter heads - Ribbon fiber and 3 mm fiber with low attenuation    Specsheet EXFO LFD-200