DC Electronic Loads

The PLA programmable electronic load is available in a large selection of voltage and current ratings. The voltage ratings can be as low as 60V, which operates at full current at .6V, and as high as 1000V. The current dissipation of these units can be as high as 1500Amps standard, but will reach much higher levels when units are paralleled. These programmable loads are available in the following wattage ratings: 800W, 1.5kW, 2kW, 2.5kW, 3kW, 4kW, 5kW, and 7.5kW. Higher wattage systems of 100kW+ are available upon request. Key Features : - Air Cooled - Market's Widest Selection - Ultra-low Voltage Operation - Closed-case Calibration - Individual FET Protection - User-friendly Controls - GPIB IEEE-488/RS-232 (Standard) - Optional Ethernet and USB - Oscillation Protection    Specsheet Amrel eLoad PLA-Series

The PLW water-cooled electronic load is available in a large range of configurations (6kW to 18kW (2U), including standard systems 100kW+. When your application calls for it, the PLW is capable of ultra-low voltage operation at high current. In addition, the eLOAD water-cooled electronic load was designed with a water control valve and protection circuitry to eliminate internal condensation. Key Features : - Water Cooled - Market's Widest Selection - Ultra-low Voltage Operation - Closed-case Calibration - Individual FET Protection - GPIB IEEE-488/RS-232 (Standard) - Ethernet and USB Available - Oscillation Protection - Customization Available - Cold Plate Temperature Display - Condensation Protection - Highest Power Dissipation Density    Specsheet Amrel eLoad PLW-Series

The LPL's ultra-compact design provides test system engineers with the ultimate solution when limited space is a factor. The LPL programmable electronic load provides 600W of dissipation in a rack mounted 1U high package. With a multi-function keypad and manual encoder on the front panel, as well as full connectivity on the rear, there's no sacrificing size for features with this high density, fully functional 1U high eLOAD. Key Features : - Low Profile (1U) - Power Range 150 to 600W, up to 600Vdc and 100Amps - 5 Operating Modes (CC, CR, CV, CP, Pulse) - Closed-case Calibration - Co-existent GPIB/SCPI & RS-232 Interfaces Standard - Ethernet and USB Interfaces Available    Specsheet Amrel eLoad LPL-Series

The PEL programmable electronic load is available in a number of voltage and current ratings. The voltage ratings can be as low as 0.6V, which operates at full current below 1V, and as high as 600V. The standard current dissipation of these units can be as high as 120Amps, but will reach higher levels when units are paralleled. These eLOAD programmable loads come in the following wattage ratings: 60W, 150W, 300W, and 600W. Key Features : - Wide Range of Models - Operation Below 1V - Closed-case Calibration - GPIB IEEE-488 and RS-232 (Standard) - Dynamic Power Profile (99 Points) - Customization Available    Specsheet Amrel eLoad PEL-Series

The ZVL zero-volt programmable electronic load is the smartest and most economical zero-volt solution on the market. AMREL's ZVL electronic load is a feature-packed, precision controlled eLoad, with the highest Bench-top 0-V current density on the market. The ZVL eLoad ranges from 60W to 300W, 0 to 120Adc, with a broad voltage density range of 10 to 150Vdc. In addition, the ZVL offers 3mV resolution1 for precision constant voltage control and 60uA resolution 2 for precision constant current control. It's easy to navigate key layout allows users to maximize control and maneuverability while capturing data for polarization curve plotting. Key Features : - Zero-volt Operation - Address Multiple Applications including Fuel Cell Testing - Closed-case Calibration - GPIB IEEE-488/RS-232 (Standard) - Dynamic Power Profile (99 Points) - Full Front Panel Control - Wide Range of Models - Customization Available    Specsheet Amrel eLoad ZVL-Series

The Kikusui PLZ-U Series for testing Switching Power Supplies, Batteries, DC/DC converters and Fuel Cells. Compact and high-performance modular electronic loads, capable of operating in 5 different modes. Model PLZ70UA permits a load input up to the rated current even when the Input Voltage is set for 0-V. Key Features : - Multi-Channel system - Compact lightweight - High-speed response - High precision and high resolution - Variable slew rate - 0 Volt input -    Specsheet Kikusui PLZ-U

With PLZ-4W series, a faster response of rise/fall time as calculated conversion value with 10µs is made possible, enabling a transient response test for the direct current and accurate reproduction of a simulation waveform as a dummy load. Key Features : - CC/CV/CR/CP - High-speed response - Variable slew rate - Discharging test of cells - Sequence function    Specsheet Kikusui - PLZ 4W